The LNPLL is a phase lock loop module that simplifies phase locking two low noise signals of the same frequency within the 5 MHz to 150 MHz operating range. The module is comprised of a low noise phase detector, a high performance loop amplifier, lock and rail detectors and a low noise voltage regulator, all integrated into a single package. Type 1 or Type 2 loop configurations are available and can be configured with loop bandwidths from 0.1 Hz to 1 kHz, depending on the tuning sensitivity of the VCO. Please consult our technical staff for assistance in configuring an LNPLL module to meet your specific requirement needs.
The LNPLL is a phase lock loop module that simplifies phase locking two low noise signals of the same frequency within the 5 MHz to 150 MHz operating range. The module is comprised of a low noise phase detector, a high performance loop amplifier, lock and rail detectors and a low noise voltage regulator, all integrated into a single package. Type 1 or Type 2 loop configurations are available and can be configured with loop bandwidths from 0.1 Hz to 1 kHz, depending on the tuning sensitivity of the VCO. Please consult our technical staff for assistance in configuring an LNPLL module to meet your specific requirement needs.
The LNPLL is a phase lock loop module that simplifies phase locking two low noise signals of the same frequency within the 5 MHz to 150 MHz operating range. The module is comprised of a low noise phase detector, a high performance loop amplifier, lock and rail detectors and a low noise voltage regulator, all integrated into a single package. Type 1 or Type 2 loop configurations are available and can be configured with loop bandwidths from 0.1 Hz to 1 kHz, depending on the tuning sensitivity of the VCO. Please consult our technical staff for assistance in configuring an LNPLL module to meet your specific requirement needs.