• Product Model

    inner-page-bg
    news-banner-bg

    Frequency Divider (LNFD)

    October 4, 2022

    3U OpenVPX

    June 20, 2022

    Designed to OpenVPX standards, Quantic Wenzel’s 3U OpenVPX is ideally suited for mission-critical RADAR and Electronic Warfare applications. Developed to meet VITA 67 technology standards, the 3U OpenVPX is SOSA aligned and environmentally sealed for exceptional phase noise performance.   The 3U OpenVPX features low-g sensitivity and has a fixed frequency range of 100 MHz to 18 GHz. All of our RF solutions are developed by a highly skilled engineering team in Austin, TX. Our manufacturing facility provides long-term support […]

    501-32763

    August 21, 2019

    Slow Transition HF PLO

    May 10, 2018

    description: The Slow Transition PLO crystal oscillator provides smooth frequency transition on loss and reacquisition of the external reference. This innovative design features a low PLL BW (≤0.1 Hz), guaranteed maximum slew rate, automatic aging correction and frequency holdover upon loss of reference, while maintaining excellent close-in noise of -145dBc at 10Hz.   FEATURES: Smooth Frequency Transition on Loss/Reacquisition of Ext Ref (≤60 ppb/second) Frequency Calibration and Aging Correction Function To -145 dBc/Hz @ 10 Hz offset PLL LBW: ≤ […]

    501-31058

    July 14, 2017

    Golden Frequency Source for Mixing

    July 14, 2017

    Making phase noise measurements at frequencies above 7 GHz can be difficult enough even without running into phase noise test set limitations. Although many of the test set manufacturers are making their systems capable of measuring higher frequencies these days, the cost for these systems is extremely high and most of us prefer to find ways of using existing or onsite instrumentation for now. The input frequency limitation for many automated phase noise test sets is around 7 GHz, so […]

    VHF Bootstrap II

    June 7, 2017

    DESCRIPTION At VHF frequencies, the Bootstrap oscillator provides unprecedented low-g sensitivity to 2e-11/g. The standard Bootstrap oscillator consists of two rugged OCXOs of the same frequency, which can be any fixed frequency between 25 MHz and 128 MHz, and all necessary components to phase lock the two oscillators together. Special compensation techniques are used to minimize vibration induced phase noise including positioning the two oscillators mechanically in two axes to offset vibration sensitivity as well as adjusting the electrical tuning […]

    HF Bootstrap II

    June 7, 2017

    DESCRIPTION At HF frequencies, the Bootstrap oscillator provides unprecedented low-g sensitivity to 2e-11/g. The standard Bootstrap oscillator consists of two rugged OCXOs of the same frequency, which can be any fixed frequency between 10 MHz and 25 MHz, and all necessary components to phase lock the two oscillators together. Special compensation techniques are used to minimize vibration induced phase noise including positioning the two oscillators mechanically in two axes to offset vibration sensitivity as well as adjusting the electrical tuning […]

    501-30434

    December 20, 2016

    501-30430

    December 20, 2016

    501-30433

    December 20, 2016

    501-30429

    December 20, 2016